Gossen Metrawatt METRALINE RCD-CHECK RCD Tester
Specifications
Measuring instrument which checks the qualities of a FI switch.
It is all about the measuring of the contact voltage in particular, determing time and tripping current of RCD types A, AC, S and F.
Features
- Digital display, backlit color OLED display
- LED for measurement point illumination
- Patented means of securing the test probes
- Compact and rugged – for service calls and laboratory use
Testing features
Testing of residual current devices (RCDs)
- Measurement of touch voltage without tripping the RCCB.
Contact voltage is measured with reference to nominal residual current using 1/3 of the nominal residual current value. - Tripping test with nom. residual current, time to trip measurement
Special tests for equipment and RCDs
- Testing of equipment and RCDs with rising residual current including indication of tripping current
- Testing of RCDs, IΔN = 10, 30, 100, 300 and 500 mA
- Testing RCDs with 1/2 IΔN, 1 IΔN, 2 IΔN, 5 IΔN up 100 mA nominal current)
- Testing RCDs with half-waves (pulsating direct current) for determining time to trip and tripping current
Testing of special RCDs
- selective S, type AC, type A
Measurement of line voltage and fault loop impedance
Product Resources
Copyright 2020 © Power Parameters Pty Ltd | Ph: 1800 623 350 | Fx: 1800 067 263
info@powerparameters.com.au.
Further information may be found at suppliers website.
Sales Terms and Conditions
Clamp Meter Calibration |
Data Logger Calibration |
Electrical Mechanical Calibration |
Electrical Tester Calibration |
Encoder Repair |
High Voltage Services |
Hipot Tester Calibration |
Insulation Resistance Tester Calibration |
Insulation Tester Repairs |
Multifunction Tester Calibration |
Multimeter Calibration |
Multimeter Repair |
Power Supply Calibration |
RCD Tester Calibration |
Uninterruptible Power Supply |
Voltmeter Calibration
Connect with an electrical engineer for support, request an audit or report.