Connect with an electrical engineer for support, request an audit or report: 1800 623 350
  • 0Shopping Cart
Power Parameters
  • HOME
  • EQUIPMENT
    • CRITICAL POWER
    • INSTRUMENTATION
  • SERVICE
  • CALIBRATION
  • New Tech
  • Knowledge
  • About
  • Contact
  • Search
  • Menu Menu
  • LinkedIn
  • Facebook
Search
Generic filters

Or search by:

INSTRUMENTATION

CRITICAL POWER

HomeInstrumentationField TestingResistance MetersGossen Metrawatt METRAHIT 27EX Intrinsically Safe Milliohmmeter for Use in Potentially Explosive Atmospheres

Gossen Metrawatt METRAHIT 27EX Intrinsically Safe Milliohmmeter for Use in Potentially Explosive Atmospheres

Specifications

Compact milliohmmeter for the measurement of low value contact resistance in potentially explosive atmospheres, for example at contacts inside aircraft fuel tanks (bonding test), as well as for general low value resistance measurements inside and outside of potentially explosive atmospheres, for example on aircraft outer skins (lightning protection and wick test).

  • Measuring ranges: 30 mΩ, 300 mΩ, 3 Ω, 30 Ω
  • Resolution: 10 μΩ
  • Measuring method: Kelvin connection (4-wire measurement)
  • DATA Hold memory: 1200 measured values
  • EX designation: Ex II 2 G EEx ia IIA T4
  • Prototype test certificate: INERIS 05ATEX0040
  • DAkkS calibration certificate
  • Guarantee: 3 years material and workmanship,
    1 to 3 years for calibration (depending upon application)
 Type  Art. No.  Ident No.
Standard M227F
AIRBUS M227G 97F92003500 according AMM (Aircraft Maintenance Manual)

 
Included accessories: Kelvin probe, Kelvin clip, batteries, protective rubber cover, hard case

Product Resources
Datasheet Enquire about this product
  • Equipment
  • SERVICE
  • CALIBRATION
  • New Tech
  • Knowledge
  • About
  • Contact

Copyright 2020 © Power Parameters Pty Ltd | Ph: 1800 623 350 | Fx: 1800 067 263
info@powerparameters.com.au. Further information may be found at suppliers website.
Sales Terms and Conditions

Clamp Meter Calibration | Data Logger Calibration | Electrical Mechanical Calibration | Electrical Tester Calibration | Encoder Repair | High Voltage Services | Hipot Tester Calibration | Insulation Resistance Tester Calibration | Insulation Tester Repairs | Multifunction Tester Calibration | Multimeter Calibration | Multimeter Repair | Power Supply Calibration | RCD Tester Calibration | Uninterruptible Power Supply | Voltmeter Calibration

1800 623 350

Connect with an electrical engineer for support, request an audit or report.

Scroll to top