61600 Series Single-phase or three-phase output selectable AC Power supply
Specifications
Key Features:
• Single-phase or three-phase output selectable
• Programmable slew rate setting for changing voltage and frequency
• Programmable voltage and current limit
• AC+DC output mode for voltage DC offset simulation
• Comprehensive measurement capability
• One-key recall for different voltage and frequency setting
• High output current crest factor, ideal for inrush current testing
• Built-in PFC, provide input power factor over 0.98 (full load)
• Analog input for power amplifier
• Turn on, turn off phase angle control
• Remote control by GPIB, RS232, USB and Ethernet interface
Model Description Inquiry
61601 Programmable AC Power Source 0-300V/15-1KHz/500VA, 1ø
61602 Programmable AC Power Source 0-300V/15-1KHz/1kVA, 1ø
61603 Programmable AC Power Source 0-300V/15-1KHz/1.5kVA, 1ø
61604 Programmable AC Power Source 0-300V/15-1KHz/2kVA, 1ø
61605 Programmable AC Power Source 0-300V/15-1KHz/4kVA, 1ø
61607 Programmable AC Power Source 0-350V/15-2KHz/3kVA, 1ø or 3ø
61608 Programmable AC Power Source 0-350V/15-2KHz/4.5kVA, 1ø or 3ø
61609 Programmable AC Power Source 0-350V/15-2KHz/6kVA, 1ø or 3ø
61611 Programmable AC Power Source 0~300V/15~1.5kHz / 12kVA, 1ø or 3ø
61612 Programmable AC Power Source 0~300V/15~1.5kHz / 18kVA, 1ø or 3ø
A615001 Remote Interface for 61601~61605 (external V input, RS-232 interface, GPIB interface)
A615002 Remote interface board (LAN and USB) for 61500/61600/61700 series
A615003 AC voltage transform unit for 61500/61600 series
A615007 Soft panel for 61500/61600 series
A615008 DC noise filter (Max. 16A) for 61500/61600 series
A615103 Parallelable power stage unit 18KVA (1ø/3ø) for 61511/61512/61611/61612 model
A615104 Input / Output terminals for parallel connecting (2 units) for 61511/61512/61611/61612/A615103 model
A615105 Input / Output terminals for parallel connecting (3 units) for 61511/61512/61611/61612/A615103 model
A615106 Reverse current protection unit for 61511/61512/61611/
Product Resources
Copyright 2020 © Power Parameters Pty Ltd | Ph: 1800 623 350 | Fx: 1800 067 263
info@powerparameters.com.au.
Further information may be found at suppliers website.
Sales Terms and Conditions
Clamp Meter Calibration |
Data Logger Calibration |
Electrical Mechanical Calibration |
Electrical Tester Calibration |
Encoder Repair |
High Voltage Services |
Hipot Tester Calibration |
Insulation Resistance Tester Calibration |
Insulation Tester Repairs |
Multifunction Tester Calibration |
Multimeter Calibration |
Multimeter Repair |
Power Supply Calibration |
RCD Tester Calibration |
Uninterruptible Power Supply |
Voltmeter Calibration
Connect with an electrical engineer for support, request an audit or report.