The PAV3000 is one model among PONOVO's PAV series four-quadrant power amplifier products.
The PAV5000 is the four-quadrant amplifier with high power applied in the semi-physical simulation power platform to analyzer the sensitive load, the equipment power adaptability, and the electric vehicle, etc. and provide the technical support and service on the power quality.
PAV3000 is with 270V/3000VA rated output capability, high frequency range upto 5kHz ±1dB, high accuracy of slew rate and time-delay response time.
It could work as both source mode to output power and also sink power mode to do power absorption.
It is vastly used by the institutes in the area of power, new energy, aerospace, rail transport, mining, petrochemical etc.
It is also the ideal R&D device of wind power, PV, electric car, large power charging device, aerospace power system, marine power system, distribute energy, micro grid etc.
It can directly connect to the popular simulation platform eg: RTDS,OPAL-RT,NI, Typhoon, etc, supporting not only analog input communication, but also digital interface communication via AURORA protocol.
PAV5000 is the four-quadrant amplifier with high power applied in the semi-physical simulation power platform to analyzer the sensitive load, the equipment power adaptability, and the electric vehicle, etc. and provide the technical support and service on the power quality.
PAV5000, the phil 4-quadramt power amplifier rtds, is designed on basis of linearity with quick response, high accuracy and lower distortion.
There are two types of test modes to meet different testing purposes.
Via the digital simulation system such as RTDS/OPAL-RT, it gives accurate dynamic simulation waveform signal to the amplifiers. The amplifiers output the high and accurate power to the simulation equipment to simulate the testing.
It supports not only analog input communication, but also digital interface communication via AURORA protocol.
The voltage can be output by user-defined with the amplitude, the phase and frequency.
PAV5000 is composed of 1 set of cabinets, the parameters are: 1×43U standard chassis; H×W×D(mm): 2100×650×900; Weight: 1×450kg. Its output is 270VAC/5000VA (382VDC/5000W), this load time is continuous.
It could work as both source mode to output power, used as a source unit and also sink power mode to do power absorption, used as a load unit.
Customers can choose the power unit according to their needs.
It is mainly with the following features:
● Extremely low harmonic distortion – Even under very non-linear load conditions
● Very fast slew rate>50V/µs
● Short Input/Output delay: < 10 µS
● Wide frequency range:DC-5kHz
● High input impedance
● High output precision
● High accuracy output
● Special port for power interactive simulation in 4-quadrant
● Support optical digital communication with PHIL interface via AURORA protocol
● Dual-gain to work smooth with different simulations
● Measurement, monitor and protection functions
● High long-term overload characteristic(up to 1-hour)
● High short-term overload characteristic(for 5-10mins)
Directly record to SD cards or internal memory for weeks of continuous monitoring without data loss. [Placeholder text box for custom product feature highlights populated later]
Power Parameters is the official authorized Australian service and technical support facility. We provide traceable calibration, certified warranty repairs, scheduled maintenance, and genuine OEM parts from our climate-controlled laboratory in Westmeadows, Victoria, as well as on-site calibration across Australia.
Model: PAV3000/5000
