The MEGABRAS MPK203x is a smart and portable digital ohmmeter. Has optimized filters and protections for measurements in electrical substations. Can be used to accurately measure very low contact resistances of high voltage circuit-breakers and switches, busbars, etc., with test currents up to 200 A. It employs the 4 terminals-method (U/I measuring principle) to avoid errors caused by test leads and their contact resistances.
Measurement accuracy is guaranteed by a state-of-the-arts signal amplification system, offset-free and of high long-term stability. Resistances readings are shown in the alphanumeric display with up to 4½ digits-resolution.
Test current may be adjusted by the operator and his value is measured using an analogue indicator (bargraph).
It has an internal memory for up to 200 readings. The serial data output (USB) may be connected to a computer to download the stored values.
The high-current generation system is based on modern technology that allows to significantly decrease both its weight (approx. 11 kg) and size. The cabinet is made of plastic material highly resistant to impacts and to environmental challenges. Internal thermal sensors in all sensitive components avoid any damage caused to the instrument due to overheating.
This is a strong but lightweight equipment, and may be easily carried by one person. It is water-resistant and can be used under severe weather conditions (IP65 with closed lid) offering an excellent performance working both in the laboratory and out in the field.
100Â A, 200Â A (True DC).
The current may be continuously adjustable from 0 to 100Â %.
0 up to 2000 µΩ (test current: up to 200 A).
0 up to 20 mΩ (test current: up to 100 A).
0.1 µΩ from 0 up to 2000 µΩ.
1 µΩ from 2 mΩ up to 20 mΩ.
3.5Â Vdc @ 200Â A.
4.5Â Vdc @ 100Â A.
5.8Â Vdc (without load).
10 mΩ @ 200 A.
30 mΩ @ 100 A.
Four-terminal, U/I.
Protects all sensitive components, avoiding any damage due to overheating.
At 200Â A this equipment may be used continuously for approx. 3 minutes before the thermal protection activates.
At 100Â A this equipment may be used continuously for approx. 15 minutes before the thermal protection activates.
Digital direct reading of very low resistances in the alphanumerical display, with up to 4½ digits. Very fast and accurate measurements.
1 Power cord
1 Ground cable
1 USB cable
1 Case for the accessories
1 User guide
1 MegaLogg3 software
2 Combined current and potential leads – 19.68 ft (6 meters)
2 Combined current and potential leads – 26.24 ft (8 meters)
2 Combined current and potential leads – 32.80 ft (10 meters)
2 Combined current and potential leads – 39.37 ft (12 meters)
2 Combined current and potential leads – 49.21 ft (15 meters)
Directly record to SD cards or internal memory for weeks of continuous monitoring without data loss. [Placeholder text box for custom product feature highlights populated later]
Power Parameters is the official authorized Australian service and technical support facility. We provide traceable calibration, certified warranty repairs, scheduled maintenance, and genuine OEM parts from our climate-controlled laboratory in Westmeadows, Victoria, as well as on-site calibration across Australia.
Model: MPK-203x
