Camille Bauer SINEAX A230s Programmable Panel Meter
Multifunctional power monitor with system analysis. Panel mounting, 96 x 96 mm. The A230 is designed for application in high, medium and low voltage systems. Any current and voltage transformers are taken into account in the calculation of the measured values.
Accurate measured values: U, I: 0.2% P, Q, S, PF, meter: 0.5% F: 0,02 Hz 4-quadrant measurement of all values in AC systems Safe 3-way galvanic isolation between all circuits 2 outputs for pulse or limit values 4 meters for active power: Incoming/outgoing with high/low tariff* 4 meters for reactive power: Inductive/capacitive or incoming/outgoing with high/low tariff* All counter values, recorded values, and settings are kept on a power supply failure System/application: Single-phase 3L balanced/unbalanced (Aron, Full), 4L balanced/unbalanced (Open-Y, Full) Dimensions 96 x 96 x 46 mm 4-digit, 14 mm high LED display Accessories
A200plus configuration software
The modules EMMOD20x extend the functionality of the power monitoring devices of the A series. Depending on the module different bus interfaces are supported, partly with additional data logger and digital inputs as well as pure analog output extensions. The following modules are available:
EMMOD201 Switchable RS232/RS485 (Modbus) interface, data logger, digital input
EMMOD202 2 analog outputs
EMMOD203 Ethernet interface (Modbus/TCP, HTTP), data logger with timestamp, 2 digital inputs
EMMOD204 Profibus DP interface
EMMOD205 LON interface, digital input / output
EMMOD206 M-Bus interface, digital input
Copyright 2020 © Power Parameters Pty Ltd | Ph: 1800 623 350 | Fx: 1800 067 263
firstname.lastname@example.org. Further information may be found at suppliers website.
Sales Terms and Conditions