Camille Bauer LINAX PQ5000 Class A Fixed Mount Power Quality Analyser
Transparent monitoring of power quality and energy consumption The LINAX PQ5000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring.
The integrated webserver allows remote access to all measured data and the parameterization of the device. The device provides a wide functionality, which can be extended further by means of optional components.
Functions Certified power quality analysis, class A acc. IEC 61000-4-30 Ed. 3 Standardized data format for power quality data: PQDIF Energy consumption analysis, class 0.5S (meters, load profiles, trend analysis) EN50160 conformity reports via SmartCollect PM20 On-site event display (with option TFT display) Direct measurement up to 690V, CATIII Condition monitoring Limit monitoring with alarming Universal process I/O Graphical measurement displays (with option TFT display) Standard I/Os (1 digital input, 2 digital outputs) Ethernet interface Device parameterization via WEB browser Firmware update Measurement display (http) Remote acquisition of measurements via control system (Modbus/TCP) Service and maintenance Modbus/RTU interface For remote acquisition of measurements via control system
Data analysis LINAX PQ5000 stores the acquired power quality data in the standardized Power Quality Data Interchange Format (PQDIF) according to IEEE 1159.3. Using the SMARTCOLLECT PM20 software the content of these files can be displayed, stored in a database and analyzed. A conformity report can be prepared as well.
Using the link www.pqview.com/pqdiffractor the free of cost software PQDiffractor of Electrotek Concepts may be downloaded (registration required). By means of this software data of the PQDIF files can be analyzed, saved in CSV format or exported as a graphic.
Options High resolution color TFT display (320x240px) Graphical measurement displays Multi-language operation Full device parameterization Uninterrupted power supply (UPS) Provides power supply for five times 3 minutes if power fails
Extensions Two extensions can be implemented in the device. You may select from: 2 relay outputs 2 analog outputs ±20mA 4 analog outputs ±20mA 4 S0 digital inputs active 4 S0 digital inputs passive Temperature Inputs: Measurement sensor Pt100 / PTC NEW Schrift Fault current detection Each fault current module provides two channels for monitoring differential or fault currents in earthed AC current systems. In any case measurement has to be performed via suitable current transformers, a direct measurement is not possible. Time synchronization via GPS Very accurate time synchronization of the measurement device using a preconfigured GPS receiver (accessory). IEC61850 interface PROFINET IO NEW Schrift
Accessories Documentation on USB stick Current Transformers GPS receiver, configured
Copyright 2020 © Power Parameters Pty Ltd | Ph: 1800 623 350 | Fx: 1800 067 263
email@example.com. Further information may be found at suppliers website.
Sales Terms and Conditions
Clamp Meter Calibration | Data Logger Calibration | Electrical Mechanical Calibration | Electrical Tester Calibration | Encoder Repair | High Voltage Services | Hipot Tester Calibration | Insulation Resistance Tester Calibration | Insulation Tester Repairs | Multifunction Tester Calibration | Multimeter Calibration | Multimeter Repair | Power Supply Calibration | RCD Tester Calibration | Uninterruptible Power Supply | Voltmeter Calibration